Learn More About the Installation of Mosaic Floors

Mosaic tiles create an interesting effect regardless of where they are incorporated. Mosaic tiles can be used in the kitchen, dining room, bathroom and even the garage. They are sturdy and can take regular wear and tear without showing signs of damage.

zoomimageglass-brick-mosaics-tiles-black-mix-tiles1386864711Mosaic tile suppliers in Singapore explain that installation of these is a simple enough procedure and it can be taken up as a DIY project. In general, there are four basic variations of mosaic tiles — unglazed ceramic, granite, glazed ceramic and marble.  Traditionally, mosaic tiles are made by putting together individual units to create a complete unit similar to a jigsaw puzzle.

The latest ones like those sold by mosaic tile suppliers in Singapore have a plastic or paper back sheet. The presence of numerous grout lines on the sheet makes the floor anti-slippery.

Installation of Mosaic tiles

The installation procedure can be broken down into four steps:

  1. Tile Preparation: Before setting the tile ensure that the floor is even and there are no obstructions like plumbing fixtures. Even out the surface by filling crevices with epoxy or rubbing down protrusions. If necessary, use guidelines by chalking out the section with chalk.
  1. Cutting to required size: Chips along the edges of tiles is common. Use a tile nipper to cut away any irregularities. Chip off the excess tiles using a utility knife. A snap cutter is used when the size of the tile to be cut is over half an inch wide.
  1. Tile setting: Coming to the main part — tile setting. Arrange the dry tiles to determine the pattern. Once you’ve chosen the patter, mark the design.  It is challenging to stick tiles without the glue oozing out from the sides. These stains are hard to clean. Better to take your time setting it than rushing through it only to create a mess. Half inch, square trowels are ideal to set mosaic tiles. The batch mixed must be damp but not runny.  Apply a thin layer and comb it out using the sides (notched). Now lay the mosaic sheet onto the mortar.
  1. Grouting: The final step is grouting. Mosaic tiles have a greater depth than the flat ceramic tiles. The gaps must be evened out. Wipe off the paste continuously with clean water. Wait overnight and using a dry cloth to buff the surface.

Setting mosaic tiles is a simpler process than ceramic tiles. While doing so, watch for the spills.